Station Template 6+2

Place a complete passenger station and both end throats in one click. FIXED LAYOUT - 4 or 6 platform tracks and 2 independent central through tracks without platforms. - 240 m platforms, high-speed rail and overhead electrification throughout. - Original station buildings, roofs, platforms and railway assets. No other mods required. OPTIONS - Right-hand or left-hand traffic: mirrors the end crossovers. Signals determine actual traffic direction and must be placed manually. - Include crossovers: enabled by default. Disable to remove the end crossovers and shorten the footprint while keeping the stopping-track fans and double-track approaches. - Overall track length: 6+2 is approximately 960 m with crossovers or 680 m without; the compact 4+2 is approximately 840 m or 560 m. HOW TO USE Enable the mod, open Railway Buildings, select Station Template 6+2, choose the options and place it. Connect the four exterior track endpoints to your railway, connect station access to a road, and add signals and lines as needed. The placement area is leveled; relatively flat terrain works best. This is a passenger station. Choose 4 or 6 platform tracks (default 6). Platform length, rail type and electrification are fixed. Keep the mod enabled in saves containing its stations. Created by Anduin. Uses Transport Fever 3 base-game assets by Urban Games. Newly placed stations have editable approach fans and crossovers for manual signals and individual track changes. The first 20 m outside each station mouth remain fixed. Existing stations need new placement to receive this change.

---

一次点击放置完整客运站及两端咽喉。 固定布局：4或6条站台到发线＋2条中央无站台独立正线；站台长度240米；全部为高速接触网铁路。使用原版站房、站台、雨棚和铁路素材，无需其他模组。 三个参数： - 到发线数量：4／6，默认6。4＋2布局仅有两个岛式站台，最外侧轨道外没有站台；保留较短咽喉，侧边站房通过地下旅客通道接入岛式站台。 - 行车方向：靠右／靠左，仅镜像两端联络道。实际行车方向由信号控制，信号需自行安装。 - 包含联络道：默认开启。关闭后去掉末端联络道并缩短占地，保留到发线咽喉和双线接入口。 全站轨道长度：6＋2含联络道约960米，不含约680米；4＋2含联络道约840米，不含约560米。 使用：启用模组，在铁路建筑菜单选择“标准车站模板：6到发＋2正线”，调整参数并放置。将四个外部轨道端点接入路网，为站房连接道路，并按需安装信号、配置线路。模板会整平场地，建议选择较平坦地形。 本模组为客运站；到发线数量可选4或6；站台长度、铁路类型和电气化均固定。含有该车站的存档请保持启用本模组。 作者：Anduin。原版素材归Urban Games所有。 新放置车站的外部咽喉和联络道为可编辑铁路，可手动放置信号及单独删改。站口外最初20米连接段保持固定。已有车站需重新放置才能获得此变化。

---

Place a complete passenger station and both end throats in one click. FIXED LAYOUT - 4 or 6 platform tracks and 2 independent central through tracks without platforms. - 240 m platforms, high-speed rail and overhead electrification throughout. - Original station buildings, roofs, platforms and railway assets. No other mods required. OPTIONS - Right-hand or left-hand traffic: mirrors the end crossovers. Signals determine actual traffic direction and must be placed manually. - Include crossovers: enabled by default. Disable to remove the end crossovers and shorten the footprint while keeping the stopping-track fans and double-track approaches. - Overall track length: 6+2 is approximately 960 m with crossovers or 680 m without; the compact 4+2 is approximately 840 m or 560 m. HOW TO USE Enable the mod, open Railway Buildings, select Station Template 6+2, choose the options and place it. Connect the four exterior track endpoints to your railway, connect station access to a road, and add signals and lines as needed. The placement area is leveled; relatively flat terrain works best. This is a passenger station. Choose 4 or 6 platform tracks (default 6). Platform length, rail type and electrification are fixed. Keep the mod enabled in saves containing its stations. Created by Anduin. Uses Transport Fever 3 base-game assets by Urban Games. Newly placed stations have editable approach fans and crossovers for manual signals and individual track changes. The first 20 m outside each station mouth remain fixed. Existing stations need new placement to receive this change.