Road Grid Builder TF3 — Сетка дорог [BETA]
Beschreibung
Road Grid Builder TF3 — сетка дорог [BETA]
Готовые дорожные кварталы для Transport Fever 3 за одну постройку. Выбирайте квадратную сетку, прямоугольные кварталы или кольца, настраивайте размер и тип улиц, затем размещайте схему на карте.
Это бета-версия. Возможны ошибки и вылеты.
Сетки больше 14×14 — 16×16, 18×18 и 20×20 — могут вызывать лаги, падение FPS и задержки при предпросмотре и строительстве. Нагрузка зависит от компьютера, карты и количества объектов. Для начала лучше выбрать 8×8 или 12×12; размер 14×14 тоже не гарантирует отсутствие задержек.
Поддержать разработку
Если мод пригодился, можно поддержать мои моды и будущие проекты разовым донатом.
Мод бесплатный. Донат добровольный, подписка не требуется. Открывайте ссылку в браузере; доступность оплаты зависит от страны и банка.
Возможности
- Три схемы: квадратная сетка, прямоугольные кварталы и кольца.
- Девять размеров: 4×4, 6×6, 8×8, 10×10, 12×12, 14×14, 16×16, 18×18 и 20×20.
- Шаг улиц: 100, 140, 180 или 220 метров.
- Штатные улицы TF3: обычные, с деревьями, автобусными полосами, трамвайными путями или шумозащитными барьерами.
- Обычные улицы или широкие главные улицы для магистралей.
- Четыре внешних въезда с привязкой к существующим дорогам.
- Дорожные шаблоны учитывают год игры; доступность отдельных вариантов зависит от эпохи.
Как пользоваться
- Установите мод и включите его в настройках карты.
- В песочнице откройте раздел с официальным инструментом создания городов — там же находится «Town Builder — сетка дорог». Выберите его для строительства сетки.
- Выберите схему, размер, шаг улиц, вид дорог и ширину магистралей.
- Разместите схему на свободном, по возможности ровном участке. Проверьте предпросмотр и внешние въезды, затем подтвердите строительство.
- Чтобы основать город внутри сетки, откройте встроенный официальный создатель городов в песочнице TF3 и разместите город внутри готовой сетки. Он построит город на созданной вами дорожной сети. Сам мод строит только дороги.
- Начните с небольшой сетки. Для больших размеров дождитесь завершения предпросмотра и строительства перед следующей установкой.
Ограничения беты
- Сетка пока не повторяет рельеф: она строится в одной плоскости и изменяет грунт. На склонах возможны насыпи и выемки.
- Наложение сеток и пересечение с готовыми дорогами остаются экспериментальными. В предыдущих версиях это приводило к вылетам; исправление не подтверждено в игре. Перед такими постройками сохраняйтесь отдельно.
- Привязка предусмотрена через внешние въезды. Мод не гарантирует корректное объединение любых совпадающих участков внутри сетки.
- Совместимость с другими дорожными модами и консолями не подтверждена. Эта сборка подготовлена для PC.
- Не удаляйте мод из сохранения, в котором уже размещены его конструкции.
При сообщении об ошибке укажите размер и схему, тип улиц, год игры и список других дорожных модов. Скриншот и последние строки stdout.txt помогут воспроизвести проблему.
Благодарности
Вдохновитель этой адаптации — okeating, автор исходного мода Town Builder для Transport Fever 2. Его работа послужила основой для переноса идеи дорожных сеток в TF3. Спасибо автору!
Исходный мод: https://steamcommunity.com/sharedfiles/filedetails/?id=3283288846
Эта сборка предназначена для TF3 и использует штатные дорожные ресурсы игры. Обложка — сгенерированная иллюстрация, а не скриншот игрового результата. Мод не является официальным продуктом Urban Games.
Road Grid Builder TF3 [BETA]
Build a complete road layout in Transport Fever 3 with a single placement. Choose a square grid, rectangular blocks or rings, adjust the size and street style, then place the layout on your map.
This is a beta release. Bugs and crashes are possible.
Grids larger than 14×14 — 16×16, 18×18 and 20×20 — may cause lag, FPS drops and delays during preview and construction. Performance depends on your computer, map and object count. Start with 8×8 or 12×12; even 14×14 is not guaranteed to be free of slowdowns.
Support development
Enjoying the mod? Help support my mods and future projects with a one-time donation.
The mod is free. Donations are optional; no subscription is required. Open the link in your browser. Payment availability depends on your country and bank.
Features
- Three layouts: square grid, rectangular blocks and rings.
- Nine sizes: 4×4, 6×6, 8×8, 10×10, 12×12, 14×14, 16×16, 18×18 and 20×20.
- Street spacing: 100, 140, 180 or 220 metres.
- Native TF3 streets: standard, tree-lined, bus lanes, tram tracks or noise barriers.
- Standard streets or wider main streets for the major roads.
- Four outer connections supporting snapping to existing roads.
- Street templates respect the game year; some options depend on the era.
How to use
- Install the mod and enable it for your map.
- In Sandbox mode, open the section containing the official town creation tool. The road-grid tool is in that same section, named “Town Builder — сетка дорог” (road grid). Select it to build your grid; its controls are in Russian.
- Choose Схема (layout), Размер (size), Шаг улиц (spacing), Улицы (street style) and Магистрали (main roads).
- Place the layout in a clear, preferably flat area. Check the preview and outer connections, then confirm construction.
- To found a town inside the grid, open TF3's built-in official town creator in Sandbox mode and place the town inside your completed grid. It will build the town on the road network you created. This mod builds roads only.
- Start with a small grid. For larger layouts, let the preview and construction finish before placing another one.
Beta limitations
- The layout does not follow terrain yet: roads are placed on one plane and reshape the ground. Slopes may produce embankments and cuttings.
- Overlapping grids and intersecting existing roads remain experimental. Earlier versions crashed in these cases; the fix has not been verified in-game. Make a separate save before trying this.
- Snapping is provided through the outer connections. Arbitrary overlapping road segments inside the layout are not guaranteed to merge correctly.
- Compatibility with other road mods and consoles has not been verified. This package is prepared for PC.
- Keep the mod enabled in saves containing its placed constructions.
When reporting a bug, include the layout and size, street style, game year and other road mods. A screenshot and the final lines of stdout.txt help reproduce it.
Credits
This adaptation was inspired by okeating, the author of the original Town Builder for Transport Fever 2. His work provided the basis for bringing the road-grid idea to TF3. Thank you to the original author!
Original mod: https://steamcommunity.com/sharedfiles/filedetails/?id=3283288846
This build targets TF3 and uses the game's native street resources. The cover is a generated illustration, not a screenshot of an in-game result. This is not an official Urban Games product.
Bilder
Mod melden
Die Meldung gilt ausschließlich für Version 1.0. Bitte nur melden, wenn du diese Version selbst getestet hast.
Melde dich an, um eine Meldung abzugeben. Pro Konto, Mod-Version und Kategorie zählt eine Meldung.
Kommentare
Auf mod.io öffnen ↗