mod.io · Mod 6431326
Cockpit Speedometers
Bitte ModManager zuerst starten. Dadurch wird der Installations-Link unter Windows registriert.
Beschreibung
Cockpit Speedometers
Eight cockpit instrument styles for Transport Fever 3. Select a vehicle, use its cockpit camera, and choose the instrument style you prefer.
Eight styles
- Rail Type 1: white analogue dial
- Rail Type 2: slanted LED display
- Rail Type 3: wide LCD display
- Car Type 1: round analogue dial
- Car Type 2: full vehicle instrument cluster
- Ship: three marine instruments
- Aircraft: six flight instruments
- Large Digital: large speed and ATC readouts
How to use
- Enable this mod in the game's Mod selection screen.
- Before loading, set the initial instrument style for road vehicles, trains, trams, aircraft, ships and other vehicles in the Mod settings.
- Open a vehicle's details and enter the cockpit camera. The small Type button beside the camera button switches that vehicle's style for the current session. This temporary choice does not change your Mod defaults.
The instrument UI supports all 13 game languages. This is a cosmetic display mod: it does not control vehicles or change the simulation.
What the instruments show
- Road and rail speed use the vehicle's actual game speed in km/h. Marine speed is shown in knots; heading and aircraft navigation instruments use available game telemetry.
- ATC is an estimate based on track, curve and vehicle speed limits, with advance indication of lower limits. It is not an actual cab-signal command and does not operate the train. During station approach, the indication steps down toward 30 and changes to 0 when the train has stopped. Lower track limits still apply. The estimate uses a confirmed stop position when available, otherwise the train's actual deceleration. Unavailable limits are shown as dashes.
- Engine RPM and road-vehicle gears are simulated display values. Fuel, coolant, air pressure, AdBlue levels and decorative warning symbols are fixed artwork; the clock and odometer are blank placeholders.
- Other mods that replace the same cockpit or vehicle-detail UI may conflict.
References
日本語
Transport Fever 3の運転席に8種類のメーターを表示するMODです。
鉄道Type1(白いアナログ計器)、鉄道Type2(傾斜LED)、鉄道Type3(横長LCD)、自動車Type1(丸型アナログ計器)、自動車Type2(車両メーターパネル)、船舶、航空機、デカデジ・タイプを収録しています。
使い方
- Mod選択画面でこのMODを有効にします。
- ロード前のMod設定で、道路車両・列車・路面電車・航空機・船舶・その他の車両の初期メーターを選びます。
- 車両詳細から運転席カメラへ入ります。カメラボタン横の小さなTypeボタンで、その車両のメーターを今回のプレイ中だけ切り替えられます。車種別の初期設定は変わりません。
メーターUIはゲームの全13言語に対応しています。表示専用で、車両の挙動やシミュレーションを変更しません。
表示値について
- 道路・鉄道の速度はゲーム内の実速度(km/h)です。船舶の速度はノットで表示し、方位や航空計器は取得できるゲーム内の情報を使います。
- ATCは線路・曲線・車両の制限速度から求める推定表示で、前方の低い制限も反映します。実際の信号指令や列車制御ではありません。駅への接近中も数値を表示し、停車に向けて段階的に30まで下げ、停車を確認すると0になります。線路などに30未満の制限がある場合は、その制限を優先します。確認済みの停車位置がある場合は残距離を使い、それ以外は実際の減速に合わせた推定表示です。制限値を取得できない場合は---と表示します。
- エンジン回転数と自動車のギアは疑似表示です。燃料・水温・空気圧・AdBlue・装飾用警告灯は固定表示で、時計と走行距離計は空欄です。
- 同じ運転席・車両詳細UIを置き換える他のMODとは競合する場合があります。
参考資料
Bilder
Mod melden
Die Meldung gilt ausschließlich für Version 1.0. Bitte nur melden, wenn du diese Version selbst getestet hast.
Melde dich an, um eine Meldung abzugeben. Pro Konto, Mod-Version und Kategorie zählt eine Meldung.
Kommentare
Auf mod.io öffnen ↗