TF3TF3 Mod PortalTransport Fever 3 · erweitert um Community-Checks
mod.io · Mod 6448590

Large Airport

von RankooKoitaiVersion 1.0Aktualisiert 13.10.2026Rev. 228,2 MiB
Bitte ModManager zuerst starten. Dadurch wird der Installations-Link unter Windows registriert.

Beschreibung

A large airport placed as one piece (Air menu > Buildings, from 1980). The terminal is a closed ring with wide-body stands on all four outer faces: 6 on the north face, 6 on the south face, 2 on the west face and 2 on the east face, all sized for 747-8 and A380. The main hall stands in the landside courtyard inside the ring. Each side has one runway: aircraft take off on its first half and land on its second half. The two sides work independently, each with its own taxi network and depot; terminals 1-8 (north and west face) use the north runway, terminals 9-16 (south and east face) the south runway. The fenced field measures 1113.22 x 804.04 m. No modules, no upgrades. Includes bundled models, meshes, animations and helper scripts. Uses base-game materials and terrain textures at their original quality. Road access: the courtyard is closed on all sides, so the road leaves it through a tunnel that you build yourself. Extend the short street in front of the hall to the west. Inside the marked zone at the west end of the courtyard lower the road 5 steps (15 m) and keep that depth until it is outside the airport fence; switch on Underground Mode while you build under the airport. The courtyard includes an eight-bay bus/truck hub. Do not place the airport on top of an existing shallow tunnel. Short-face stands (terminals 7 and 8, 15 and 16) use a one-way return taxiway: aircraft enter on the inner side and leave on the outer side. Individual stand stubs remain bidirectional; aircraft can still queue on the shared main taxiway and at merges. Choose alternative terminals on the same runway side. Place a new airport to use this layout; existing airports are not rebuilt by this mod update. Removing the mod from a save removes airports built with it.
一体放置的大型机场(航空菜单 > 建筑,1980 年起)。航站楼为封闭的环形,四个外侧立面都设宽体机位:北面 6 个、南面 6 个、西面 2 个、东面 2 个,全部按 747-8 与 A380 尺寸设计;主楼位于环内的陆侧庭院。南北两侧各有一条跑道,飞机在跑道前半段起飞、后半段降落。两侧各自独立运行,各有独立的滑行网络和机库;停靠位 1 至 8(北面和西面)使用北跑道,9 至 16(南面和东面)使用南跑道。围栏内占地 1113.22×804.04 米。无模块、无升级。模组内自带模型、网格、动画及辅助脚本;材质与地形贴图继续使用原版资源,保留原始画质。 道路接入:庭院四面封闭,道路需要由你自建隧道引出。把主楼前的短街向西延伸;在庭院西端的标记区内将道路下降 5 级(15 米),并保持该深度直到机场围栏之外;在机场下方施工时请开启地下模式。中庭内已设八泊位公交/卡车枢纽。不要把机场放在已有的浅层隧道上方。 短边机位(停靠位7、8和15、16)使用单向回线:内侧进入、外侧离开。各机位接线仍为双向,共用主滑行道和合流处仍可能排队;备用停靠位请选择同一跑道侧。 更新后请新放置机场使用此布局;已有机场不会由本模组更新自动重建。 从存档中移除本模组会同时移除用它建造的机场。

Bilder