TF3TF3 Mod PortalTransport Fever 3 · erweitert um Community-Checks
mod.io · Mod 6463951

Parallelgleise / Parallel Tracks

von MothIntoFlameVersion 1.0Aktualisiert 19.10.2026Rev. 2046,4 KiB
Bitte ModManager zuerst starten. Dadurch wird der Installations-Link unter Windows registriert.

Beschreibung

DEUTSCH Baue 1–50 parallele Gleise direkt mit dem normalen Gleisbauwerkzeug. Die Gleisanzahl enthält das Gleis, das du mit der Maus ziehst. Gleisabstand und Anordnung links, rechts oder beidseitig sind einstellbar. Links und rechts beziehen sich auf die Richtung, in der du den neuen Abschnitt zeichnest. SO GEHT ES 1. Mod aktivieren und das normale Gleisbauwerkzeug öffnen. 2. „Parallelgleise bauen“ einschalten. Gleisanzahl, Gleisabstand und Seite einstellen. 3. Den Abschnitt wie gewohnt zeichnen, die Vorschau prüfen und den Bau bestätigen. GRÜNE ANSCHLUSSPFEILE – MEHRGLEISIG WEITERBAUEN Die grünen Pfeile zeigen geeignete Startpunkte an freien Enden erkannter Gleisbündel. Sie sind Bauhilfen und zeigen NICHT die Fahrtrichtung von Zügen oder Signalen an. Pro Anschlussreihe wird ein passender Startpunkt hervorgehoben; der Pfeil kann sich mit Mausposition und Einstellungen ändern. Zum Verlängern dieselbe Gleisanzahl und denselben Abstand wie beim vorhandenen Bündel wählen. „Seite“ so einstellen, dass die zusätzlichen Gleise auf der vorhandenen Seite entstehen. Dann genau am markierten Gleisende beginnen und nach außen weiterzeichnen. So kann die Vorschau alle Gleise passend an die vorhandenen Enden anschließen. Bei „Links“ oder „Rechts“ liegt der geeignete Startpunkt typischerweise am äußeren Gleis; bei „Beidseitig“ entsprechend weiter innen. Entscheidend ist der angezeigte Pfeil, nicht pauschal die Mitte des Bündels. Wird kein passender Pfeil angezeigt, Gleisanzahl, Abstand, Seite und freie Gleisenden prüfen. Die Pfeile lassen sich mit „Anschlusspfeile anzeigen“ ausblenden. Auch mit grünem Pfeil vor dem Bestätigen die normale Bauvorschau auf Anschluss und Kollisionen prüfen. MIT ODER OHNE SIGNALE Ohne Signale: „Signale automatisch setzen“ auf „Nein“ stellen. Es werden nur die Gleise gebaut. Bereits vorhandene Signale bleiben erhalten und Signale lassen sich später mit dem normalen Spielwerkzeug ergänzen. Mit Signalen: „Signale automatisch setzen“ auf „Ja“ stellen, Signaltyp und Signalabstand auswählen. Nach abgeschlossenem Gleisbau setzt die Mod Signale auf die gebauten Gleise. Die Typauswahl kennzeichnet die Herkunft: Grundspiel oder jeweilige Mod; verfügbar sind die vom Spiel geladenen Signalmodelle. „In Baurichtung“: Signale für die Richtung, in der du den Abschnitt zeichnest. „Gegen Baurichtung“: die entgegengesetzte Richtung. „Beide Richtungen“: Signale für beide Richtungen auf jedem Gleis; dies bedeutet nicht, dass abwechselnde Gleise automatisch unterschiedliche Einbahnrichtungen erhalten. Der „Versatz der Gegensignale“ verschiebt die Gegenrichtungssignale längs des Gleises, damit sie nicht an derselben Stelle stehen. Einstellbar sind 1–100 m (Standard 10 m). Der Versatz muss kleiner als der Signalabstand sein. Der Signalabstand ist von 50–2000 m einstellbar. Die Pfeile bleiben unabhängig von der Signaleinstellung reine Anschlusshilfen. LEISTUNG BEI VIELEN GLEISEN Bei großen Gleisbündeln, insbesondere mit 50 Gleisen und automatischen Signalen, kann das Spiel während der Vorschau oder beim Bauen kurz stocken. Je nach PC-Leistung und Länge des Abschnitts kann die Berechnung etwas Wartezeit benötigen. Bitte den Bauvorgang abwarten und nicht mehrfach hintereinander bestätigen. Falls nötig, kürzere Abschnitte oder weniger Gleise auf einmal bauen. ENGLISH Build 1–50 parallel tracks directly with the standard track construction tool. The track count includes the track you draw with the mouse. Adjust track spacing and place additional tracks on the left, right or both sides. Left and right are relative to the direction in which you draw the new section. GETTING STARTED 1. Enable the mod and open the standard track construction tool. 2. Enable parallel track construction (“Parallelgleise bauen”). Set the track count, spacing and side. 3. Draw the section as usual, check the preview and confirm construction. GREEN CONNECTION ARROWS – EXTENDING MULTIPLE TRACKS The green arrows mark suitable starting points at open ends of detected track bundles. They are construction guides, NOT train travel directions or signal directions. One suitable starting point is highlighted for each row of endpoints; its position may change with your mouse position and settings. To extend a bundle, select the same track count and spacing as the existing tracks. Choose the side so that the additional tracks match the existing arrangement. Start precisely at the marked track endpoint and draw outwards. This allows the preview to connect all tracks to their matching existing endpoints. For Left or Right, the suitable starting point is typically on an outer track; for Both sides, it is correspondingly further inside. Follow the displayed arrow rather than always starting in the centre. If no suitable arrow appears, check the track count, spacing, selected side and open endpoints. Hide the arrows using “Anschlusspfeile anzeigen” (Show connection arrows). Even with a green arrow, check the normal construction preview for connections and collisions before confirming. WITH OR WITHOUT SIGNALS Without signals: set “Signale automatisch setzen” (Place signals automatically) to No. Only the tracks are built. Existing signals are preserved, and you can add signals later using the standard game tool. With signals: enable “Signale automatisch setzen”, then select a signal type and spacing. After track construction is complete, the mod places signals on the newly built tracks. Each signal type is labelled with its source: the base game or the relevant mod. Available types come from the signal models loaded by the game. “In Baurichtung” (Along construction direction): signals face the direction in which you draw. “Gegen Baurichtung” (Against construction direction): the opposite direction. “Beide Richtungen” (Both directions): signals for both directions on every track; this does not automatically alternate one-way directions between neighbouring tracks. “Versatz der Gegensignale” (Opposing signal offset) shifts the opposing signals along the track so they do not occupy the same position. Choose 1–100 m (default 10 m). The offset must be smaller than the signal spacing. Signal spacing can be set to 50–2000 m. Connection arrows remain construction guides regardless of the signal setting. PERFORMANCE WITH MANY TRACKS Large track bundles, especially 50 tracks with automatic signals, may cause brief stuttering while previewing or building. Depending on your PC performance and the length of the section, calculations may take a little time. Please let construction finish and avoid confirming the same build repeatedly. If needed, build shorter sections or fewer tracks at once.

Bilder