TF3TF3 Mod PortalTransport Fever 3 · erweitert um Community-Checks
mod.io · Mod 6467691

Functional Crossing Signs

von Zhenya_Version 1.0Aktualisiert 23.10.2026Rev. 282,1 KiB
Bitte ModManager zuerst starten. Dadurch wird der Installations-Link unter Windows registriert.

Beschreibung

(Deutsch unten)

Functional Crossing Signs puts stop, yield and priority signs on crossings, and the vehicles obey them. Where an arm's lanes do not lead everywhere, a direction sign below shows where they do.

Note! This mod directs the traffic with an invisible traffic light. The game cannot switch a light's phase yet without building the whole light anew. Each rebuild slows down the vehicles on the crossing and the roads next to it. That is why up to three vehicles may go at once at a stop sign instead of one.

Choose "Traffic signs" as the light type in the crossing window, or click a crossing with the "Traffic signs" tool among the road tools in the build menu. A second click with the tool removes the signs. The side roads get stop, the main road gets the priority sign 301 where a side road with a sign joins on its right (the mod settings can leave it out, for countries without such a sign). At a motorway ramp the ramp gets yield. In the crossing window you choose the sign for each arm: no sign, priority (301), priority road (306), yield or stop. The mod never puts up 306 by itself. Where the arm's lanes do not lead everywhere, you can also choose the direction sign alone, and vehicles there do not wait. Tear down a sign with the bulldozer and its arm gets no sign.

  • Stop. Every vehicle stops at the line and goes once the crossing traffic is clear.
  • Yield. Vehicles go without stopping when the crossing traffic is far enough away.
  • The mod checks conflicts lane by lane. A right turn from a yield arm only waits for traffic that crosses its path.
  • No vehicle from a sign arm drives into an exit that is full.
  • When an arm's lanes do not lead to every other road of the crossing, its sign gets a plate below with the directions they do lead to, for example ahead or left.
  • An arm no lane leads into gets a no entry sign (267) facing the crossing. If no lane leads out of it either, it gets the sign for no vehicles (250).
  • When you build a street onto a sign crossing and the game takes its light away, the mod puts the signs back with the kinds you chose.

The mod never changes the lane connections of a crossing. Set them as you like with the Crossing Tool. Who waits for whom and which direction sign an arm gets follows from these connections.

The signs come from Signs Builder Kit Pt.3 (DE), which this mod needs. The mod sets the main sign of each arm. Click a sign to change it further with the kit, for example to add a plate below it. When you choose another sign for the arm in the crossing window, the mod swaps only the main sign and keeps the rest.

In the mod settings you choose how far the signs stand from the edge of the road, separately for country roads with a shoulder.

Optimized Traffic Lights works together with this mod. With both active, the crossing window offers traffic lights and traffic signs.

Remove the signs with the tool before you remove the mod.

Support me on Ko-fi: https://ko-fi.com/zhenya_

Changelog

Revision 2

  • New settings: distance of the signs from the road edge, separately for country roads with a shoulder.
  • The main road gets 301 only where a side road with a sign joins on its right.
  • Performance: leaner, refactored code.
  • The sign rows no longer scroll in a box of their own.

Revision 1

  • First release.

Deutsch

Functional Crossing Signs stellt Stopp-, Vorfahrt-gewähren- und Vorfahrtsschilder an Kreuzungen auf und die Fahrzeuge halten sich daran. Führen die Spuren einer Zufahrt nicht überallhin, zeigt ein Richtungsschild darunter, wohin sie führen.

Achtung! Diese Mod regelt den Verkehr über eine unsichtbare Ampel. Das Spiel kann die Phase einer Ampel bislang nicht umschalten, ohne die ganze Ampel neu zu bauen. Jeder Neubau bremst die Fahrzeuge auf der Kreuzung und den Straßen daneben. Deshalb dürfen an einem Stoppschild bis zu drei Fahrzeuge auf einmal fahren statt einem.

Im Kreuzungsfenster „Verkehrsschilder“ als Ampeltyp wählen oder mit dem Werkzeug „Verkehrsschilder“ bei den Straßenwerkzeugen im Baumenü auf eine Kreuzung klicken. Ein zweiter Klick mit dem Werkzeug entfernt die Schilder. Die Nebenstraßen bekommen Stopp, die Hauptstraße das Vorfahrtsschild 301, wo rechts davon eine Nebenstraße mit Schild einmündet (in den Mod-Einstellungen abschaltbar, für Länder ohne ein solches Schild). An einer Autobahnauffahrt bekommt die Auffahrt Vorfahrt gewähren. Im Kreuzungsfenster wählst du das Schild jeder Zufahrt: kein Schild, Vorfahrt (301), Vorfahrtstraße (306), Vorfahrt gewähren oder Stopp. 306 setzt die Mod nie von sich aus. Führen die Spuren der Zufahrt nicht überallhin, kannst du auch nur das Richtungsschild wählen, Fahrzeuge dort warten dann nicht. Reißt du ein Schild mit dem Bulldozer ab, bekommt die Zufahrt kein Schild.

  • Stopp. Jedes Fahrzeug hält an der Linie und fährt, sobald der Querverkehr frei ist.
  • Vorfahrt gewähren. Fahrzeuge fahren ohne anzuhalten, wenn der Querverkehr weit genug entfernt ist.
  • Die Mod prüft Konflikte je Spur. Ein Rechtsabbieger aus einer Zufahrt mit Vorfahrt gewähren wartet nur auf Verkehr, der seinen Weg kreuzt.
  • Kein Fahrzeug einer Schilder-Zufahrt fährt in eine volle Ausfahrt.
  • Führen die Spuren einer Zufahrt nicht zu jeder anderen Straße der Kreuzung, bekommt ihr Schild darunter ein Schild mit den Richtungen, in die sie führen, zum Beispiel geradeaus oder links.
  • Ein Arm, in den keine Spur hineinführt, bekommt das Schild „Verbot der Einfahrt“ (267) mit Blick zur Kreuzung. Führt auch keine Spur heraus, bekommt er das Schild „Verbot für Fahrzeuge aller Art“ (250).
  • Baust du eine Straße an eine Schilderkreuzung an und das Spiel entfernt dabei ihre Ampel, stellt die Mod die Schilder mit der gewählten Art wieder auf.

Die Mod ändert nie die Spurverbindungen einer Kreuzung. Mit dem Kreuzungs-Werkzeug legst du sie fest, wie du magst. Aus diesen Verbindungen ergibt sich, wer auf wen wartet und welches Richtungsschild eine Zufahrt bekommt.

Die Schilder stammen aus Signs Builder Kit Pt.3 (DE), das diese Mod braucht. Die Mod setzt das Hauptschild jeder Zufahrt. Ein Klick auf ein Schild öffnet den Editor des Kits, dort lässt sich zum Beispiel ein Zusatzschild ergänzen. Wählst du im Kreuzungsfenster ein anderes Schild für die Zufahrt, tauscht die Mod nur das Hauptschild und lässt den Rest, wie er ist.

In den Mod-Einstellungen legst du fest, wie weit die Schilder vom Fahrbahnrand stehen, getrennt für Landstraßen mit Seitenstreifen.

Optimized Traffic Lights arbeitet mit dieser Mod zusammen. Sind beide aktiv, bietet das Kreuzungsfenster Ampeln und Verkehrsschilder an.

Entferne die Schilder mit dem Werkzeug, bevor du die Mod entfernst.

Bilder