TF3TF3 Mod PortalTransport Fever 3 · erweitert um Community-Checks
mod.io · Mod 6472522

PPs Rangieren

von PPpajaVersion 1.0Aktualisiert 10.11.2026Rev. 1580,1 KiB
Bitte ModManager zuerst starten. Dadurch wird der Installations-Link unter Windows registriert.

Beschreibung

🔴-🟡 This mod: Red-Yellow, discontinued for now 

My mods will use these stability & compatibility ratings:

🔴 Red: In development. Expect bugs, crashes or conflicts, for testing.

🟡 Yellow: Should work, but still needs polish. Issues or conflicts are possible.

🟢 Green: Ready for normal play. No known major stability or compatibility issues.


DEUTSCH Alpha Testversion, rechne mit Fehlern! Die Mod verändert den gewohnten Vanilla Ablauf: Rangierfahrten, Kuppeln und Bremsprobe verlängern Bahnhofsaufenthalte deutlich. Plane mehr Zeit und Platz ein; der Durchsatz deiner Linien kann bzw wird sinken. Am besten auf einer Spielstandkopie testen.

Ich kann nicht Kompatibilität zu allen Mods garantieren, aktuell bekannt inkompatibel sind: -Push-Pull Trains oder Ähnliche Mods die die Eigenschaften von Zügen/Wagen ändern


Für Realismus und Schönbaufans: Statt beim Wenden sofort umzudrehen, bleibt der Wagenzug stehen. Die Lok kuppelt ab, fährt einen von dir festgelegten Gleisweg zum anderen Zugende und kuppelt dort wieder an. Geeignete Trieb und Wendezüge können einen Führerstandswechsel mit Wartezeit erhalten. Nicht eingerichtete Züge behalten ihr normales Spielverhalten. Einrichtung (steht auch ingame): -Im Depot Zug kaufen -im Mod Menü dieser Mod den Zug wählen und einrichten klicken -Den Zug jetzt auf eine Linie schicken -In den zweiten Tab der Mod wechseln, für jede Station einstellen was der Zug tun soll: --normaler Halt: Der Zug hält und fährt anschließend in derselben Fahrtrichtung weiter. --Führerstand wechseln: Für geeignete Triebzüge und Wendezüge, die von beiden Zugenden aus gesteuert werden können. --Rangierweg bearbeiten: die beiden Rangierhalte sowie einen Durchfahrtpunkt auf dem Umfahrgleis markieren. Alternativ „Rangierweg automatisch berechnen“ verwenden. Alle Stationen brauchen eine Zuweisung sonst bleibt der Zug stehen. Vanilla Linien/nicht eingerichtete Züge laufen ganz normal. Ein Sonderfall: Wenn der Zug ZB von Stadt A nach B fährt und das Depot hinter Stadt liegt, also der Zug Depot - A - B in selber Richtung fährt, dann fährt er ja erst mal falsch rum in den Bahnhof A, dann einfach bei der Station kurzfristig "durchfahrt" machen und erst auf Rangieren umstellen sobald er von A - B unterwegs ist. Sichtbare Rangiersimulation: Wagen und Fahrgäste bleiben technisch im ursprünglichen Zugverband und werden daher weiter beladen/entladen auch wenn der zug rangiert.


ENGLISH To switch to English, open Rangierbetrieb → Zeiten → Sprache / Language and select English. Alpha test release – expect bugs! This mod changes the usual vanilla operation: shunting, coupling and brake tests make station stops substantially longer. Allow more time and track space, and expect reduced throughput on your lines. Test on a copy of your save first.

I cannot guarantee compatibility with all mods; the following are currently known to be incompatible: - Push-Pull Trains or similar mods that alter the properties of trains or cars


For realism and scenic layout fans: instead of simply reversing direction, the coaches or wagons stay where they are. The locomotive visibly uncouples, follows a track route you define to the other end of the train, then couples up again. Suitable multiple units and push-pull trains can receive a timed cab change. Trains you have not equipped retain their normal game behaviour. Setup (also explained in-game): - Assemble the desired train in the depot. For locomotive-hauled trains, the locomotive must be first in the formation when equipping it. - Open the mod’s “Shunting” menu, select the train and click “Equip train for shunting”. - Then assign the train to a line. - Open the second tab, “Shunting Routes”, and configure what the train should do at every line stop: - Normal stop: The train stops, then continues in the same direction. - Cab change: For suitable multiple units and push-pull trains that can be driven from either end. - Locomotive run-round: Choose “Edit shunting route” and mark the two reversing stops and a via point on the run-round track. Alternatively, use “Calculate shunting route”. - Apply a manually marked or automatically calculated route by clicking “Save run-round”. Every line stop needs an assigned operation; otherwise, an equipped train will wait there. These operations apply to all equipped trains on the same line. Trains you have not equipped continue operating normally. Special case on the first trip from the depot: If the route is Depot → A → B, the train does not need to reverse at A on its first visit. Temporarily set A to “Normal stop”. Once the train is travelling from A to B, you can change A to a locomotive run-round. Visual shunting simulation: coaches, wagons, passengers and cargo technically remain in the original train formation. Normal loading and unloading can therefore continue during the visible shunting movement. Before removing the mod, restore all equipped trains in the depot and save your game.

Bilder