TF3TF3 Mod PortalTransport Fever 3 · erweitert um Community-Checks
mod.io · Mod 6496631

Load Priority

von ModioUser2vr6k6Version 1.0Aktualisiert 08.11.2026Rev. 814,4 KiB
Bitte ModManager zuerst starten. Dadurch wird der Installations-Link unter Windows registriert.

Beschreibung

Choose whether your vehicles load passengers first or cargo first. No new compartments, no capacity changes.

How it works

  • Dynamic priority: on line stops that load both passengers and cargo, the mod adjusts each kind's load percentage every few seconds. The preferred kind gets as much capacity as is waiting; the other kind gets all the rest, so vehicles that can carry both leave full. Your cargo selection is never unticked.
  • Load order: the vehicles' existing compartments and load configurations are reordered so the preferred kind comes first. The game uses this order when both choices would load the same amount.

Settings

  • Priority: Passengers first (default) / Cargo first
  • Dynamic priority: On (default) / Off. Off keeps only the load order and restores all stop settings.
  • Debug log: Off (default) / On. Writes each mixed stop's waiting counts, capacities and shares to stdout.txt.
  • Load order applies to: All (default) / Road + tram / Rail / Water / Air

Notes

  • The load percentages you see in the line window change while the mod works. This is expected; your own percentages come back when Dynamic priority is turned off.
  • If you edit a stop's percentages yourself, the mod takes your new values as the original.
  • While it adjusts a stop, "destroy cargo on configuration change" is paused for that stop so the adjustments never destroy cargo on board. Your setting comes back afterwards.
  • The mod reads the vehicle's load configurations and simulates the game's choice, so the preferred kind is never shut out by a config that carries only the other kind. Vehicles that can carry only one kind are left alone.
  • Capacity is read from the vehicle heading to that stop. Lines that mix very different vehicles may not fill exactly.
  • Before removing the mod: set Dynamic priority to Off, let the game run a few seconds and save. Then remove it.

Why the percentages sometimes look odd (e.g. 50% / 50%)

Many vehicles have only a few fixed ways to load, for example all cargo, all passengers, or half and half. To make sure waiting passengers can board, the mod picks percentages that make the game choose a loading that includes them. With only a few passengers waiting, this can mean carrying less cargo on that trip. When enough passengers are waiting, the vehicle switches to carrying passengers.

Compatibility

  • Do not let another loading-limit mod manage the same lines, for example Smart Cargo Loading. Both mods change the stops' load percentages, so they keep overwriting each other and the percentages jump back and forth.
  • To use both: in Smart Cargo Loading, turn off "Automate this industry's input stocks" for the industries served by your mixed passenger and cargo lines, and leave those lines to Load Priority.
  • Mods that only change vehicle capacity or loading speed work fine.

繁體中文

設定車輛優先載乘客或優先載貨物。不加貨艙、不改容量。

  • 動態優先:同一站同時勾選乘客和貨物的路線站點,模組每幾秒調整一次各類的裝載比例:優先的一類有多少在等就分多少容量,其餘全部給另一類,讓能同時載客貨的車輛滿載出發。不會取消你的勾選。模組會讀取車輛的裝載方案並模擬遊戲的選擇,確保優先的一類不會被「只載另一類」的方案擠掉;只能載一種的車輛不會被調整。
  • 注意:路線視窗裡的百分比會隨時變動,這是正常的;關閉動態優先後會恢復你原本的比例。調整期間會暫停該站的「若變更配置,將於抵達時銷毀貨物」,避免貨物被銷毀,之後會還原。
  • 方案排序:把車輛原本的貨艙與裝載方案重新排序,讓優先的一類排前面(兩種方案載得一樣多時生效)。
  • 參數:優先裝載(乘客優先 / 貨物優先)、動態優先(開啟 / 關閉)、除錯紀錄(關閉 / 開啟,寫入 stdout.txt)、方案排序套用載具(全部 / 公路+電車 / 鐵路 / 船 / 飛機)。
  • 為什麼百分比有時看起來很怪(例如 50% / 50%):很多車輛只有幾種固定的裝法,例如全載貨、全載客、各一半。為了讓在等的乘客上得了車,模組會調整百分比,讓遊戲選擇「有乘客」的裝法。乘客很少時,那一趟可能會少載一些貨物;乘客夠多時,車輛就會改成載乘客。
  • 移除模組前:先把「動態優先」設為關閉,讓遊戲跑幾秒、存檔,再移除。
  • 相容性:不要讓其他會調整裝載比例的模組(例如 Smart Cargo Loading)管同一條路線,兩個模組會互相覆蓋,比例會來回跳動。兩個都想用的話,請在 Smart Cargo Loading 的產業視窗裡,關閉客貨混載路線所服務產業的「Automate this industry's input stocks」。只改車輛容量或裝載速度的模組沒有影響。

简体中文

设置车辆优先装载乘客或优先装载货物。不增加货舱、不改变容量。

  • 动态优先:同一站同时勾选乘客和货物的线路站点,模组每几秒调整一次各类的装载比例:优先的一类有多少在等就分配多少容量,其余全部给另一类,让能同时装载客货的车辆满载出发。不会取消你的勾选。模组会读取车辆的装载方案并模拟游戏的选择,确保优先的一类不会被“只装另一类”的方案挤掉;只能装一种的车辆不会被调整。
  • 注意:线路窗口里的百分比会随时变化,这是正常的;关闭动态优先后会恢复你原本的比例。调整期间会暂停该站的“若变更配置,将于抵达时销毁货物”,避免货物被销毁,之后会还原。
  • 方案排序:把车辆原本的货舱与装载方案重新排序,让优先的一类排在前面(两种方案装载量相同时生效)。
  • 参数:优先装载(乘客优先 / 货物优先)、动态优先(开启 / 关闭)、调试日志(关闭 / 开启,写入 stdout.txt)、方案排序适用载具(全部 / 公路+有轨电车 / 铁路 / 船舶 / 飞机)。
  • 为什么百分比有时看起来很怪(例如 50% / 50%):很多车辆只有几种固定的装法,例如全装货、全载客、各一半。为了让在等的乘客能上车,模组会调整百分比,让游戏选择“有乘客”的装法。乘客很少时,那一趟可能会少装一些货物;乘客够多时,车辆就会改成载乘客。
  • 移除模组前:先把“动态优先”设为关闭,让游戏运行几秒、存档,再移除。
  • 兼容性:不要让其他会调整装载比例的模组(例如 Smart Cargo Loading)管理同一条线路,两个模组会互相覆盖,比例会来回跳动。两个都想用的话,请在 Smart Cargo Loading 的产业窗口里,关闭客货混装线路所服务产业的“Automate this industry's input stocks”。只改变车辆容量或装载速度的模组没有影响。

Bilder