TF3TF3 Mod PortalTransport Fever 3 · erweitert um Community-Checks
mod.io · Mod 6511320

Zugspeicher

von hornbostVersion 1.0Aktualisiert 08.11.2026Rev. 3222,8 KiB
Bitte ModManager zuerst starten. Dadurch wird der Installations-Link unter Windows registriert.

Beschreibung

Underground storage for passenger and freight trains. Two track spirals lead to an underground operating stop and back to the surface. Available from 1930 under Rail > Buildings. Add the operating stop to a line for a scheduled stop or use waypoints for a through run. Build below the map or place the connecting tracks at the map edge and point the spirals outwards. This lets you place the storage section outside the map while keeping its entry and exit connected to your network. Settings include storage type (passenger or freight), straight section length (200 or 500 m), return loop, one or two entry tracks and one or two exit tracks, approach length (90–400 m, at least 110 m with four connections), right- or left-hand running, track type, catenary, signal spacing in the spirals (approx. 150–750 m), spacing between the main connections with a return loop and separate connections (5–300 m), and optional approach block signals. Choose 10, 20, 30, 40, 50 or 60 storage spaces. The largest setting is designed for 60 trains if each train fits within one signal block with room to spare. Longer trains can occupy more than one block, reducing the number that fit. Independent recreation based on an idea by RPGFabi.
Garage souterrain pour trains de voyageurs et de fret. Deux rampes hélicoïdales relient la surface à un arrêt de service souterrain. Disponible à partir de 1930 dans le menu des bâtiments ferroviaires. Ajoutez l’arrêt de service à la ligne pour une halte programmée ou utilisez des points de passage pour traverser le garage. Construisez sous la carte ou placez les voies de raccordement en bord de carte en orientant les rampes vers l’extérieur. Le garage peut ainsi se trouver hors de la carte tout en restant relié au réseau par son entrée et sa sortie. Réglages disponibles : type de garage (voyageurs ou fret), longueur de la section droite (200 ou 500 m), boucle de retournement, une ou deux voies à l’entrée et à la sortie, longueur des voies d’accès (90 à 400 m, au moins 110 m avec quatre raccordements), circulation à droite ou à gauche, type de voie, caténaire, espacement des signaux dans les rampes (environ 150 à 750 m), écart entre les raccordements principaux avec boucle et raccordements séparés (5 à 300 m) et signaux de cantonnement supplémentaires sur les voies d’accès. Choisissez 10, 20, 30, 40, 50 ou 60 places. Le réglage maximal est prévu pour 60 trains si chaque train tient dans un canton avec une marge suffisante. Les trains plus longs peuvent occuper plusieurs cantons, ce qui réduit la capacité réelle. Recréation indépendante d’après une idée de RPGFabi.
Zugspeicher für Personen- und Güterzüge. Zwei Gleiswendeln führen zu einem unterirdischen Betriebshalt und zurück. Ab 1930 unter Eisenbahn > Gebäude verfügbar. Nimm den Betriebshalt für einen planmäßigen Halt in die Linie auf oder nutze Wegpunkte für die Durchfahrt. Du kannst den Speicher unter der Karte bauen oder die Anschlussgleise am Kartenrand ansetzen und die Wendeln nach außen ausrichten. So kann der Speicher außerhalb der Karte liegen, während Ein- und Ausfahrt mit deinem Streckennetz verbunden sind. Einstellbar sind Speichertyp (Personen- oder Güterzüge), Länge der geraden Speicherstrecke (200 oder 500 m), Kehrschleife, je ein oder zwei Ein- und Ausfahrtsgleise, Zufahrtslänge (90–400 m, bei vier Anschlüssen mindestens 110 m), Rechts- oder Linksverkehr, Schienentyp, Oberleitung, Signalabstand in der Wendel (ca. 150–750 m), Abstand der Hauptanschlüsse bei Kehrschleife und getrennten Anschlüssen (5–300 m) sowie zusätzliche Blocksignale in den Zufahrten. Wählbar sind 10, 20, 30, 40, 50 oder 60 Stellplätze. Die größte Einstellung ist auf 60 Züge ausgelegt, wenn jeder Zug mit Reserve in einen Signalblock passt. Längere Züge können mehrere Blöcke belegen. Dann passen entsprechend weniger hinein. Eigenständiger Nachbau nach einer Idee von RPGFabi.
Underground storage for passenger and freight trains. Two track spirals lead to an underground operating stop and back to the surface. Available from 1930 under Rail > Buildings. Add the operating stop to a line for a scheduled stop or use waypoints for a through run. Build below the map or place the connecting tracks at the map edge and point the spirals outwards. This lets you place the storage section outside the map while keeping its entry and exit connected to your network. Settings include storage type (passenger or freight), straight section length (200 or 500 m), return loop, one or two entry tracks and one or two exit tracks, approach length (90–400 m, at least 110 m with four connections), right- or left-hand running, track type, catenary, signal spacing in the spirals (approx. 150–750 m), spacing between the main connections with a return loop and separate connections (5–300 m), and optional approach block signals. Choose 10, 20, 30, 40, 50 or 60 storage spaces. The largest setting is designed for 60 trains if each train fits within one signal block with room to spare. Longer trains can occupy more than one block, reducing the number that fit. Independent recreation based on an idea by RPGFabi.
Ricovero sotterraneo per treni passeggeri e merci. Due rampe elicoidali collegano la superficie a una fermata di servizio sotterranea. Disponibile dal 1930 nel menu degli edifici ferroviari. Aggiungi la fermata alla linea per una sosta programmata oppure usa i punti di passaggio per attraversare il ricovero. Costruisci sotto la mappa oppure posiziona i binari di raccordo sul bordo della mappa e orienta le rampe verso l’esterno. Il ricovero può così trovarsi fuori dalla mappa, con ingresso e uscita collegati alla rete. Puoi impostare il tipo di ricovero (passeggeri o merci), la lunghezza del tratto rettilineo (200 o 500 m), l’anello di ritorno, uno o due binari per l’ingresso e per l’uscita, la lunghezza dei raccordi (90–400 m, almeno 110 m con quattro raccordi), la circolazione a destra o a sinistra, il tipo di binario, la catenaria, la distanza tra i segnali nelle rampe (circa 150–750 m), la distanza tra i raccordi principali con anello di ritorno e raccordi separati (5–300 m) e i segnali di blocco aggiuntivi sui raccordi. Puoi scegliere 10, 20, 30, 40, 50 o 60 posti. L’impostazione massima è pensata per 60 treni se ciascuno entra in una sezione di blocco con un margine sufficiente. I treni più lunghi possono occupare più sezioni di blocco e ridurre la capacità effettiva. Ricostruzione indipendente basata su un’idea di RPGFabi.
Garage souterrain pour trains de voyageurs et de fret. Deux rampes hélicoïdales relient la surface à un arrêt de service souterrain. Disponible à partir de 1930 dans le menu des bâtiments ferroviaires. Ajoutez l’arrêt de service à la ligne pour une halte programmée ou utilisez des points de passage pour traverser le garage. Construisez sous la carte ou placez les voies de raccordement en bord de carte en orientant les rampes vers l’extérieur. Le garage peut ainsi se trouver hors de la carte tout en restant relié au réseau par son entrée et sa sortie. Réglages disponibles : type de garage (voyageurs ou fret), longueur de la section droite (200 ou 500 m), boucle de retournement, une ou deux voies à l’entrée et à la sortie, longueur des voies d’accès (90 à 400 m, au moins 110 m avec quatre raccordements), circulation à droite ou à gauche, type de voie, caténaire, espacement des signaux dans les rampes (environ 150 à 750 m), écart entre les raccordements principaux avec boucle et raccordements séparés (5 à 300 m) et signaux de cantonnement supplémentaires sur les voies d’accès. Choisissez 10, 20, 30, 40, 50 ou 60 places. Le réglage maximal est prévu pour 60 trains si chaque train tient dans un canton avec une marge suffisante. Les trains plus longs peuvent occuper plusieurs cantons, ce qui réduit la capacité réelle. Recréation indépendante d’après une idée de RPGFabi.
Zugspeicher für Personen- und Güterzüge. Zwei Gleiswendeln führen zu einem unterirdischen Betriebshalt und zurück. Ab 1930 unter Eisenbahn > Gebäude verfügbar. Nimm den Betriebshalt für einen planmäßigen Halt in die Linie auf oder nutze Wegpunkte für die Durchfahrt. Du kannst den Speicher unter der Karte bauen oder die Anschlussgleise am Kartenrand ansetzen und die Wendeln nach außen ausrichten. So kann der Speicher außerhalb der Karte liegen, während Ein- und Ausfahrt mit deinem Streckennetz verbunden sind. Einstellbar sind Speichertyp (Personen- oder Güterzüge), Länge der geraden Speicherstrecke (200 oder 500 m), Kehrschleife, je ein oder zwei Ein- und Ausfahrtsgleise, Zufahrtslänge (90–400 m, bei vier Anschlüssen mindestens 110 m), Rechts- oder Linksverkehr, Schienentyp, Oberleitung, Signalabstand in der Wendel (ca. 150–750 m), Abstand der Hauptanschlüsse bei Kehrschleife und getrennten Anschlüssen (5–300 m) sowie zusätzliche Blocksignale in den Zufahrten. Wählbar sind 10, 20, 30, 40, 50 oder 60 Stellplätze. Die größte Einstellung ist auf 60 Züge ausgelegt, wenn jeder Zug mit Reserve in einen Signalblock passt. Längere Züge können mehrere Blöcke belegen. Dann passen entsprechend weniger hinein. Eigenständiger Nachbau nach einer Idee von RPGFabi.
Underground storage for passenger and freight trains. Two track spirals lead to an underground operating stop and back to the surface. Available from 1930 under Rail > Buildings. Add the operating stop to a line for a scheduled stop or use waypoints for a through run. Build below the map or place the connecting tracks at the map edge and point the spirals outwards. This lets you place the storage section outside the map while keeping its entry and exit connected to your network. Settings include storage type (passenger or freight), straight section length (200 or 500 m), return loop, one or two entry tracks and one or two exit tracks, approach length (90–400 m, at least 110 m with four connections), right- or left-hand running, track type, catenary, signal spacing in the spirals (approx. 150–750 m), spacing between the main connections with a return loop and separate connections (5–300 m), and optional approach block signals. Choose 10, 20, 30, 40, 50 or 60 storage spaces. The largest setting is designed for 60 trains if each train fits within one signal block with room to spare. Longer trains can occupy more than one block, reducing the number that fit. Independent recreation based on an idea by RPGFabi.
Ricovero sotterraneo per treni passeggeri e merci. Due rampe elicoidali collegano la superficie a una fermata di servizio sotterranea. Disponibile dal 1930 nel menu degli edifici ferroviari. Aggiungi la fermata alla linea per una sosta programmata oppure usa i punti di passaggio per attraversare il ricovero. Costruisci sotto la mappa oppure posiziona i binari di raccordo sul bordo della mappa e orienta le rampe verso l’esterno. Il ricovero può così trovarsi fuori dalla mappa, con ingresso e uscita collegati alla rete. Puoi impostare il tipo di ricovero (passeggeri o merci), la lunghezza del tratto rettilineo (200 o 500 m), l’anello di ritorno, uno o due binari per l’ingresso e per l’uscita, la lunghezza dei raccordi (90–400 m, almeno 110 m con quattro raccordi), la circolazione a destra o a sinistra, il tipo di binario, la catenaria, la distanza tra i segnali nelle rampe (circa 150–750 m), la distanza tra i raccordi principali con anello di ritorno e raccordi separati (5–300 m) e i segnali di blocco aggiuntivi sui raccordi. Puoi scegliere 10, 20, 30, 40, 50 o 60 posti. L’impostazione massima è pensata per 60 treni se ciascuno entra in una sezione di blocco con un margine sufficiente. I treni più lunghi possono occupare più sezioni di blocco e ridurre la capacità effettiva. Ricostruzione indipendente basata su un’idea di RPGFabi.

Bilder