Japanese Railways Props and Networks
Beschreibung
For support, join the Japan Infrastructure Project Discord.
This mod is best used with Japanese Railways Signal and Signs and Japanese Catenaries and Buffers.
このMODは、「Japanese Railways Signal and Signs」と「Japanese Catenaries and Buffers」と併用することをおすすめします。
Bring the small details of Japanese railways to your lines: the tiger-rope barriers between tracks, the inspection walkways of the depots, cable troughs, right-of-way and snow fences, and the clutter of a track maintenance site.
Japanese Railway props is a pack of lineside equipment modelled after real Japanese installations. Every object has weathered physical materials (galvanized and painted steel, concrete, timber, gravel) and baked ray-traced ambient occlusion. Some items are laid with tools that follow the track you click; the others are free assets you place anywhere.
Barriers between tracks
JP Barriers between tracks (Rail tools menu): point a track segment on the side where the barrier goes and click.
- Types: tiger rope high or low, metal chain high or low, posts only high or low, and pipe frames in three sizes (large, medium, small) with 0, 0.5, 1, 2, 3 or 5 m between the frames.
- Distance: in auto mode the barrier sits in the middle between the clicked track and the nearest parallel track on that side (2.5 m from the track centre if there is none). A fixed distance from 1.5 to 3.5 m can also be chosen.
- Level: on the ballast between two tracks, on the terrain on the outer side, chosen automatically or forced. The concrete footings reach below the ground, so nothing floats when the ballast is lowered (for example with Real Track Cant).
- Station tracks: on straight station tracks the tool lays a separate barrier along the track, without modifying the station.
- End posts: JP Barrier end posts fixes an end post at the exact joint where a rope or chain run stops (same side, distance and level). End posts are removed together with their track.
- JP Remove barriers between tracks clears a segment on both sides, or only the end post or station barrier you click. Signals, catenary and the other decorations are kept.
- The game's own preview shows the result before you click.
Lines laid along a track segment
Same principle (Rail tools menu): point the side of the track and click; the distance is measured from the track centre and the level follows the ballast or the terrain, automatically or forced. A remove mode clears the segment.
- JP Cable troughs (ケーブルトラフ): concrete U-troughs with separate chamfered lids, single or double.
- JP Right-of-way fence (線路柵): green chain-link fence 1.5 m high, or chamfered concrete posts with barbed wire 1.2 m high.
Inspection walkways (点検台)
JP Inspection walkway (Rail > Signals menu) snaps beside a straight track where you click, like a signal board.
- Height: high, deck 3.0 m above the rail head for roofs and pantographs, or low, 1.1 m for the car floor level.
- Deck length: from 2 to 300 m in 2 m steps.
- Stairs at one end, at the other or at both ends; side of the track; distance from the track centre 1.6, 1.7, 1.8, 2.0, 2.2 or 2.5 m; deck depth 0.8, 1.0 or 1.2 m.
- Galvanized gratings, handrails, steel columns every 4 m or less on concrete footings. The footings go deep into the ground, so the walkway also stands correctly on the slope of an embankment, not only between two tracks.
Free assets
All in the asset menu, placed freely like any prop.
- JP Snow fence (防雪柵): steel snow fences of Hokkaido and Tohoku lines, in runs of 1 to 25 bays of 4 m (4 to 100 m), always starting and ending on a post. H-section posts, ribbed steel slats, struts and concrete footings behind the fence; a button turns the struts to the other side.
- Collector (吹きだめ柵), 3.5 m: porous, small gap at the bottom, set far from the track so the snow settles before it.
- Blocking (吹き止め柵), 3.0 m: dense, no gap at the bottom.
- Blower (吹き払い柵), 3.5 m: louvres tilted at 35° with a 1 m gap at the bottom, close to the track, blowing the snow off it.
- JP Anti-animal pipe fence (単管パイプ柵): scaffold-pipe fence about 3 m high, in runs of 1 to 30 bays of 1.8 m (1.8 to 54 m). Simple: five rails. Braced: seven rails, yellow couplers and kickers to short stakes, with a button for the side of the kickers.
- JP Track work items: orange barricade with bars, yellow-green barricade with bars, orange A-frame, yellow-green A-frame, and the green-cross work-safety flag (安全旗).
- JP Trackside equipment and material: relay box (継電器箱), electrical cabinet, point-machine housing (電気転てつ機), small maintenance hut, stacked rails of 25 m and 10 m, stacks of concrete and wooden sleepers, a ballast heap and a long ballast windrow.
- JP Boundary markers and plates: railway land boundary markers, concrete posts with a red top, the 工 mark engraved on every face and a cross on top, low (0.40 m) or tall (0.75 m), and a 「危険 立入禁止」 (danger, no entry) plate.
- JP Striped pole: painted marker pole with 20 cm bands, blue / white, red / white or red / yellow, 2, 3 or 4 m high.
Quality and performance
- Shapes and dimensions taken from photographs of real Japanese installations.
- Weathered PBR materials; ray-traced ambient occlusion baked into every model.
- Level-of-detail distances aligned with the base game's assets of the same size; far models are simplified.
- Everything is decorative and does not change train operation. Per-segment items use the game's own track decorations. The only script reacts to track removals (to delete orphaned end posts) and never polls in the background.
Companion mods
Made to be used with Japanese Overhead lines (catenaries) and Japanese Railways signals by the same author. No other mod is required.
日本語
線間のトラロープ柵、車両基地の点検台、ケーブルトラフ、線路柵や防雪柵、保線作業の資材など、日本の鉄道ならではの細部をあなたの路線に。
Japanese Railway props は、実際の日本の設備をもとにした沿線設備のパックです。すべての物体に使い込まれた物理ベースの質感(亜鉛めっき鋼・塗装鋼・コンクリート・木・砂利)とレイトレースでベイクしたアンビエントオクルージョンを施しています。クリックした線路に沿って設置するツールと、どこにでも置ける自由配置のアセットがあります。
線間柵
JP 線間柵(鉄道ツールメニュー):柵を置く側で線路区間を指してクリックします。
- 種類: トラロープ(高・低)、金属チェーン(高・低)、支柱のみ(高・低)、パイプ柵(大・中・小、柵の間隔 0・0.5・1・2・3・5 m)。
- 距離: 自動では、その側で最も近い並行線との中間に配置(並行線がなければ線路中心から2.5 m)。1.5~3.5 mの固定距離も選べます。
- 設置高さ: 線間は道床上、外側は地面。自動または手動で選択。コンクリート基礎は地中まで延びるため、道床を下げても(Real Track Cant など)浮きません。
- 駅構内線: 直線の駅構内線では、駅を変更せずに線路沿いへ別の柵を設置します。
- 端末支柱: JP 柵の端末で、ロープ・チェーン柵が終わる継ぎ目に端末支柱を設置(同じ側・距離・高さ)。線路を撤去すると端末も撤去されます。
- JP 線間柵を撤去で区間の両側の柵、またはクリックした端末・駅の柵だけを撤去。信号・架線・他の装飾は残ります。
- クリック前にゲーム標準のプレビューで結果を確認できます。
線路区間に沿って設置する設備
同じ方法(鉄道ツールメニュー):線路の側を指してクリック。距離は線路中心から、高さは道床または地面に自動または手動で合わせます。撤去モードもあります。
- JP ケーブルトラフ: 面取りした蓋付きのコンクリートU字溝、単列または複列。
- JP 線路柵: 高さ1.5 mの緑色の金網柵、または高さ1.2 mの面取りコンクリート柱と有刺鉄線。
点検台
JP 点検台(鉄道 > 信号メニュー)は、信号標識のようにクリックした直線の線路脇にスナップします。
- 高さ: 高=レール頭部上3.0 m(屋根・パンタグラフ点検用)、低=1.1 m(床面高さ)。
- 長さ: 2~300 m、2 m刻み。
- 階段(片側・反対側・両側)、線路の側、線路中心からの距離 1.6・1.7・1.8・2.0・2.2・2.5 m、奥行き 0.8・1.0・1.2 m。
- 亜鉛めっきのグレーチング、手すり、4 m以下の間隔で立つ鋼製の柱とコンクリート基礎。基礎は地中深くまで延びるため、線間だけでなく盛土の法面でも正しく立ちます。
自由配置のアセット
すべてアセットメニューにあり、自由に配置できます。
- JP 防雪柵: 北海道・東北の路線の鋼製防雪柵。4 mの区間を1~25区間(4~100 m)、必ず支柱で始まり支柱で終わります。H形鋼の支柱、リブ付き鋼板、背面の控え材とコンクリート基礎。ボタンで控え材の側を反転。
- 吹きだめ柵(3.5 m):空隙が多く下部に小さな間隙。線路から離して設置し、手前に雪を溜めます。
- 吹き止め柵(3.0 m):密で下部間隙なし。
- 吹き払い柵(3.5 m):35°の傾斜板と下部1 mの間隙。線路の近くに置き、雪を吹き払います。
- JP 単管パイプ柵(動物侵入防止): 高さ約3 m、1.8 mスパンを1~30スパン(1.8~54 m)。簡易: 横5本。補強: 横7本、黄色クランプと短い杭への控え。控えの側はボタンで選択。
- JP 保線作業用品: バー付きのオレンジ・黄緑のバリケード、オレンジ・黄緑のA型バリケード、緑十字の安全旗。
- JP 沿線機器・資材: 継電器箱、電気機器箱、電気転てつ機カバー、小さな保線小屋、25 m・10 mの積み重ねたレール、PCまくらぎ・木まくらぎの山、バラストの山と細長いバラスト。
- JP 用地境界標・標識: 頭部を赤く塗り、各面に「工」、頭頂に十字を刻んだコンクリートの用地境界標(低 0.40 m・高 0.75 m)と「危険 立入禁止」の標識。
- JP 標識ポール: 20 cmごとに塗り分けたポール、青白・紅白・赤黄、高さ2・3・4 m。
品質と負荷
- 形状と寸法は実際の日本の設備の写真に基づいています。
- 使い込まれたPBR質感。すべてのモデルにレイトレースのアンビエントオクルージョンをベイク。
- LOD距離は同じ大きさのゲーム標準アセットに合わせ、遠景では簡略化します。
- すべて装飾で、運転には影響しません。区間ごとの設備はゲーム標準の線路装飾を使います。スクリプトは線路撤去時に不要な端末支柱を消すときだけ動作し、常時監視は行いません。
関連MOD
同じ作者の Japanese Overhead lines(架線)と Japanese Railways signals(信号)と組み合わせて使えます。他のMODは必要ありません。
Bilder
Mod melden
Die Meldung gilt ausschließlich für Version 1.0. Bitte nur melden, wenn du diese Version selbst getestet hast.
Melde dich an, um eine Meldung abzugeben. Pro Konto, Mod-Version und Kategorie zählt eine Meldung.
Kommentare
Auf mod.io öffnen ↗